Technical Data Sheet
TDS-F600
Product
F600 Upholstery Contact Adhesive
High-performance contact adhesive formulated for upholstery, leather, foam, fabrics, and porous surfaces. Provides a strong, flexible bond with excellent heat and aging resistance.
Technical Specifications
| Reference | F600 |
| Type | Contact adhesive |
| Base | Polychloroprene (Neoprene) |
| Color | Yellow / Transparent |
| Viscosity | 3,000 – 6,000 mPa·s |
| Solids | 18 – 22% |
| Open time | 3 – 8 min |
| Heat resistance | 80 °C |
| Application temp. | 10 – 40 °C |
| Shelf life | 12 months |
Applications
- Furniture and automotive upholstery
- Natural and synthetic leather
- Polyurethane foam
- Fabrics and textiles
- Wood, MDF, and particleboard
- Laminates and porous surfaces
Packaging
- 1 L
- 5 L
- 20 L
- 200 L
Application Instructions
- 1Clean and dry both surfaces. Remove dust, grease, and contaminants.
- 2Apply a uniform coat of adhesive to both surfaces using a brush, roller, or spray gun.
- 3Allow solvent to flash off for 3–8 minutes until adhesive is dry to the touch.
- 4Join surfaces with firm, even pressure. Bond is immediate on contact.
- 5For higher strength, apply additional pressure with a roller or press for 30 seconds.
- 6Full strength achieved after 24 hours.
Safety
- Use in well-ventilated areas
- Avoid contact with eyes and skin
- Keep away from heat sources
- Wear gloves and eye protection
- Refer to Safety Data Sheet (SDS)
Storage
- Store between 5 °C and 30 °C
- Keep container tightly closed
- Protect from direct sunlight
- Shelf life: 12 months from manufacture
- Do not freeze
Version: 1.0 — 2026
Information provided is for guidance only. Akvo Chemicals assumes no liability for incorrect product use.