Technical Data Sheet
TDS-F100
Product
F100 Fom Tak Spray Adhesive
Low-odor, high-efficiency spray adhesive for foam, sponge, fabrics, insulation, and lightweight materials. Environmental formula with excellent coverage and controlled open time.
Technical Specifications
| Reference | F100 |
| Type | Spray adhesive |
| Base | Polychloroprene / SBS |
| Color | Transparent / Pale yellow |
| Aerosol pressure | 3.5 – 4.5 bar |
| Coverage | 4 – 6 m² / L |
| Open time | 5 – 15 min |
| Heat resistance | 70 °C |
| Application temp. | 15 – 40 °C |
| Shelf life | 18 months |
Applications
- Polyurethane foam and sponge
- Fabrics, felt, and non-woven textiles
- Acoustic and thermal insulation
- Automotive panels and upholstery
- Mattresses and padded furniture
- Lightweight and porous materials
Packaging
- 500 mL aerosol can
- 5 L drum (spray gun)
- 20 L drum (spray gun)
Application Instructions
- 1Shake container well before use. Ensure nozzle is clean.
- 2Clean surfaces of dust, grease, and moisture.
- 3Apply spray at 25–35 cm distance in smooth, even strokes.
- 4Allow 5–15 minutes flash-off time until adhesive is dry to the touch.
- 5Join surfaces with firm pressure. Bond is immediate on contact.
- 6For foams, apply to one surface only. For dense materials, apply to both.
Safety
- Use in well-ventilated areas
- Do not inhale aerosol vapors
- Keep away from flames and sparks
- Pressurized container: do not pierce or incinerate
- Refer to Safety Data Sheet (SDS)
Storage
- Store between 5 °C and 25 °C
- Do not expose to temperatures above 50 °C
- Protect from direct sunlight
- Shelf life: 18 months from manufacture
- Keep out of reach of children
Version: 1.0 — 2026
Information provided is for guidance only. Akvo Chemicals assumes no liability for incorrect product use.